Choosing a Zetor Water Pump: Working Requirements and Integration Fit for 84-017-529

Why Getting the Zetor Water Pump Selection Right Matters

A water pump sits at the heart of an engine's cooling system, and choosing an incorrect replacement can lead to cooling failures, leaks, or mechanical incompatibility. When sourcing a zetor water pump, buyers must go beyond a generic description and verify part numbers, physical fit, and materials before placing an order. This guide explains the practical selection criteria using confirmed product details from HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD.

Key Selection Criteria for a Zetor Water Pump

1. OEM Part Number Verification

The most reliable starting point for any replacement zetor water pump is the OEM part number stamped on the original component or listed in the engine service manual. HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD supplies several Zetor-compatible water pumps under distinct OEM references:

Note that 84-017-529 and 84.017.529 are formatted differently but buyers should cross-check the weight (5.72 kg vs. 4.2 kg) and confirm which variant is original to their machine. The 84.017.529 pump is described as featuring a pulley low, 2 grooves configuration (reference article number 83,017,500), which is a distinct integration detail.

2. Physical Dimensions and Envelope Fit

Before ordering, verify that the replacement pump fits the available space in the engine bay. The confirmed dimensional envelope for the main product variants is:

• Length: 0.32 m
• Width: 0.20 m
• Height: 0.18 m

All three confirmed variants share this dimensional footprint, which simplifies packaging and drop-in fit checks. However, weight differences (5.72 kg, 4.2 kg, and 4.05 kg) indicate internal differences between variants, so dimensional fit alone does not confirm part interchangeability.

3. Material Construction Compatibility

All confirmed zetor water pump variants from HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD use gray cast iron for the housing, pulley, and impeller. Gray cast iron offers good machinability and vibration damping, which suits agricultural engine applications. Buyers who need a different material (for example, for corrosive coolant environments) should confirm material compatibility before ordering.

4. Pulley and Drive Configuration

The pulley design directly affects belt drive compatibility. The 84.017.529 variant explicitly specifies a low pulley with 2 grooves, which must match the belt routing and tensioner geometry of the target engine. For the 84-017-529 variant, the product is described as a water pump with pulley without specifying groove count. Buyers should confirm the drive belt specification from their engine's service documentation to avoid mismatches.

5. Bearings

The 84-017-529 product listing confirms the use of a bearing unit (integrated bearing assembly). Buyers replacing a worn zetor water pump should verify whether their current pump uses the same bearing unit format, as this affects ease of installation and the availability of compatible seals.

6. Warranty and After-Sales Scope

HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD provides a 12-month quality guarantee covering free maintenance for quality-related problems and technical support throughout the production life of the pump. This is a confirmed after-sales commitment applicable to the confirmed product range.

Applicable Products

Based on the confirmed materials, the following zetor water pump products are available from HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD:

• zetor water pump 84-017-529 — water pump with pulley; housing, pulley and impeller in gray cast iron; bearing unit; dimensions 0.32 × 0.20 × 0.18 m; 5.72 kg; Engine/Cooling system catalog group.
• 84.017.529 Water pump for ZETOR — low pulley, 2-groove configuration (article 83,017,500); housing, pulley and impeller in gray cast iron; 4.2 kg; same dimensional envelope.
• Zetor Water pump 86017999 — OEM 86017999, article 55010697; Engine/Cooling system; 4.05 kg; same dimensional envelope.

All three products are manufactured in China and packed in carton boxes or color boxes.

Purchasing and Integration Checklist

Before finalizing a zetor water pump order, buyers are advised to confirm the following:

1. Match the OEM part number from the engine service manual or the original component to one of the confirmed references (84-017-529, 84.017.529, or 86017999).
2. Verify dimensional fit against the confirmed 0.32 × 0.20 × 0.18 m envelope.
3. Confirm pulley groove count against the drive belt specification for your engine model — critical for the 84.017.529 low-pulley, 2-groove variant.
4. Check coolant compatibility with gray cast iron construction.
5. Confirm bearing unit format for installation requirements.
6. Review MOQ requirements: MOQ is 1 pcs for sample or small orders, with standard commercial orders at 100 pcs minimum.
7. Agree on packing format — neutral, standard, or custom branded packaging is available.

About HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD

HEBEI LONGSHENGTENGYU PUMP INDUSTRY CO., LTD is an industrial pump manufacturer and supplier based in China, integrating R&D, manufacture, and trade services. The company has held more than 20 hydraulic utility model patents and has been serving both domestic and international markets for over two decades. Products undergo 100% factory testing before shipment, and third-party inspection is accepted upon buyer request.

Note on pricing and delivery: Confirmed materials indicate a standard delivery date range of 15–30 days; in-stock items may ship within 2–3 days and out-of-stock items within 7–15 days. Specific prices are not published in the confirmed product materials and should be requested directly via inquiry. No price or certification claims are made in this article beyond what the source materials confirm.